Browsed by
Tag: 240sx

Vegas Drift 1/28/17

Vegas Drift 1/28/17

This was the first event of the 2017 season, and it was held on my most favorite track of all the Vegas layouts the outside road course. With about only 20 drivers drifting on the actual road course (north course) and (main course) it left those drivers that showed up with more seat time than they could handle,not only was the drivers roster low but we were lacking event staff too.  I was asked to run the north course which…

Read More Read More

Finished

Finished

           Upon returning from our trip across country to pick up my sick new toy. I knew I really needed to finish my cage completely, this basically was just getting bobby to get me some 16g steel plate for the a pillar dimple dies, paint the cage, interior back in, dash cut to fit, glue in the window I failed to break upon removal, and some wiring. It seems like a lot but in reality it…

Read More Read More

VEGASDRIFT Practice 5/4/2014

VEGASDRIFT Practice 5/4/2014

                                       OK short and sweet. its 11:30 pm im leaving on my trip across america in 5 hours im super tired but i wanted to get these pictures posted, since by the time i get back in 2 weeks they will be old news. I shot a ton of pics there is about 250 total on my Flickr which i will link…

Read More Read More

Door Bars

Door Bars

                                   As i draw nearer to the end of this cage i find it harder and harder to stay motivated, with the heat now reaching the 90s, and the start of my trip across america on Monday. I feel more and more like just ” ehh ill do it later ” or ” im not going to drive when its hot out, so ill…

Read More Read More

More cage work

More cage work

                today was a trying day, after putting my seat in to check for head clearance i realized that there was not much. so i had to pretty much start the front half of the cage all over. After already having made the halo bar and A pillar bars, today i had to completely redo them for more head room.  it was a hard start to the day, but i ended up coming…

Read More Read More

It's my time… ( for a cage )

It's my time… ( for a cage )

After the recent success of doing Bobby’s cage, it was now time to start doing mine. I decided while it was still fresh in my mind I would start, Since I seem to forget how to use some of the tools and what dimensions work best if too much time passes between cages.  The criteria for my cage is going to be basic as we’ll. it is a must for me to have good head clearance with a helmet on,…

Read More Read More

Nicolas CAGE TIME

Nicolas CAGE TIME

                      I don’t really get on here as often as i should, even though im always fixing, fabing, modifying, changing, improving, destroying, or doing something car related. but to be honest usually every project that i do i always think about taking pictures after i have already finished, then i pretty much just say forget it and figure ill post one picture on instagram. however this situation is different in…

Read More Read More

Some updates on Ever’s car

Some updates on Ever’s car

                       This is what his car looks like now. it’s on the ground. engine is in, roll cage done, just needs to get wired up. these pictures aren’t the best i just wanted to get some updates on the blog since i have been slacking on posting lately.