FUNCTION CERTIFIED

Well this is a very special function certified. I know we have had domestics in the past, but this one is a classic example of making what you have work. This car fits the function theory to a T. It’s not your typical car that you would fix up. Honda, Toyota, Nissan, but in fact a chevy cavalier. James’ 97 z24 is not your average car. When you hear fixed up cavalier You dont realy know what to think, will it be stupid like some Midwestern teenagers fast and furious domestic wanna be, or will it be one of the most amazing home built all by hand cars you have seen in a while. We are going to go with the latter one. Big congrats to James for making this car a more then qualified candidate for being function certified. Enough with the words here is all the specs and pictures.enjoy!!!

Engine:

Custom made/ tuned cold air intake
K&N E-1006 air filter
RKSport poly insert for the upper mount
RKSport poly lower engine dogbone mount

Atomic Fabrications 2.5 inch full header back exhaust w/ optional side exit
Moroso resonator and Cherry bomb muffler
RKSport Billet aluminum underdrive crank pulley
Autotransinterceptor transmission shift kit
RSM Racing 61mm throttlebody
RSM Racing bored intake manifold
Accel adjustable fuel pressure regulator
VDO 1.5 inch fuel pressure gauge
Earl’s and Russel’s AN plumbing
Custom built DIS ignition system
MSD 8224 coil packs
MSD DIS-2 6211 ignition system
Accel ProStock 8mm wires
4 wire heated, first bank O2 sensor conversion
Behr oil cooler from Mercedes
Permacool oil filter sandwich adaptor using FL-1A Motorcraft oil filter
MRZ Performance billet brake reservoir cap, coolant cap, and power steering cap
RKSport carbon fiber brake reservoir cover
OverkillEngineeringMotorsports carbon fiber throttle cover

Suspension/ Chassis/ Wheels/ Brakes:

GM 3 point front strut tower brace
Front strut bar supplemental bar
1999 Alero Aluminum control arms-hand crafted to fit
Prothane urethane control arm bushings
Eibach 22mm rear swaybar
Eibach 26mm front swaybar
TurboTechRacing K brace
4 point underbody V brace
RKSport rear strut tower bar
Earls and Russel brake lines
12 inch Wilwood front brake kit
Neon SRT-4 rear disc swap
Motul RB600 brake fluid
ABS delete using Earls lines
Nexo 16×7 inch, 42mm offset rims
Rota Boost rims 17×8 38mm offset
McGaurd Spline Drive lugnuts
2 point floor/ room bar
4 point trunk brace
4 point B-pillar brace
Overkill Eng. Motorsports front camber plates
Overkill Eng. Motorsports modified rear pillow ball mounts

Interior:

Grant Challenger 4 spoke 13.5 inch steering wheel
ProForm shift light w/ blue lens
Custom pushbutton start switch w/ safety cover
Billet lighter and billet tilt lever
Fan bypass override switch
TCC control switch
Triple gauge pod with Cyberdyne voltmeter, AeroForceTech Scan gauge, and AEM Uego
AutoMeter oil pressure guage and fuel pressure gauges on the dash
Outside air intake temperature sensor w/ lcd readout
Faze vacuum/ boost gauge
R-1 Racing Sports seats
R-1 Racing Sports aluminum petals, hard mounted
Manual center console
3 black lights
2 underdash blue neons
Hidden terminal blocks for power, ground, and turn on leads
ACC Black pile carpet
Rear seat delete, fully carpeted
2.2 rear deck conversion
HPTuners remote hookup in dash
Fire extinguisher
Jegs battery box w/ Braille battery for the battery relocation

Exterior:

Toyota Cavalier 2.4Z badging
Erebuni carbon fiber,extractor hood
Seibon carbon fiber trunk purchased from DarkStars
MOMO stainless hood pins
Front bumper swap from original Z24 to 2.2 Cavalier front bumper
RKSport front lip
RKSport ‘Import Fighter’ sideskirts
Nokya 65 watt 2500K headlamps
Amber corners replacing factory clears
Amber bumper lense replacing the factory clears
Pontiac Sunfire tail light assembly
Custom led backup lights
Flaming river battery kill switch
Vision Motorsports front tow hook
Shorty antenna